CCT 100-490 (RSTECH) | Cisco Certified Technician - Routing and Switching

Overall rating: 4.9 based on 3,795 reviewsG 4.9/5f 4.9/5
The CCT 100-490 (RSTECH) | Cisco Certified Technician, Routing and Switching training at WebAsha Technologies in Pune prepares you for Cisco's entry-level technician certification for supporting and replacing Cisco devices onsite. Cisco retired the 100-490 RSTECH exam on 9 February 2025 and folded CCT Routing and Switching into the CCT Field Technician certification, so the course now follows the 800-150 FLDTEC (v1.0) exam.

You will learn what a field technician needs on site: networking foundations (the OSI model, TCP/IP, addressing and cabling), identifying Cisco devices and their roles, common service tasks (connecting to the console port, common Cisco IOS commands, password recovery), Cisco software (IOS images, licensing and configuration files), and the process for replacing Cisco switches, routers, firewalls, UCS servers and collaboration devices.

The 800-150 FLDTEC is a 120-minute entry-level exam. Cisco does not publish the number of questions. WebAsha's hardware and IOS labs give you practical experience for a first networking job and a base for CCNA.
Duration:40 Hrs (Weekdays & Weekend Session)
Mode:Online/Classroom
Certification:Prepares for Cisco CCT Routing and Switching (100-490 RSTECH)
Institute:WebAsha Technologies
Includes:Expert-Led Sessions, Practice Tests & Attendance Certificate
WhatsApp Download Syllabus
Trusted By

1000+ leading universities and companies

Our learners are hired by technology, IT services and consulting companies.

  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
  • Hiring partner
Recent Placements Testimonials

CCT 100-490 (RSTECH) | Cisco Certified Technician - Routing and Switching recent reviews

Our learners talk about how the program changed their careers.

View All
Verified Reviews

Student reviews and success stories

Real feedback from learners now placed across top technology and consulting firms.

sourabh-fernandes.webp

Sourabh Fernandes

Network Administrator · Cognizant

“The CCT program at WebAsha genuinely lived up to its reputation. Every topic was reinforced with practical lab assignments instead of just slides. The course focused on routing, switching, subnetting, VLANs, and enterprise network troubleshooting through practical, real-world scenarios. The mock interviews and interview preparation sharpened me for real technical rounds. The batch was slightly large at times, yet the hands-on focus and support made it well worth it.”
Verified Student
arjun-naik.webp

Arjun Naik

Network Administrator · LTIMindtree

“I recently finished the CCT course at WebAsha Technologies and it was worth every minute. Each module built logically, and the coverage of routing, switching, subnetting, VLANs, and enterprise network troubleshooting was thorough and current. The placement assistance team actively shared openings and guided me until I was placed. Doubt-clearing sessions ran even after class hours, which I really appreciated. The knowledge and confidence I gained here continue to help me every day at work.”
Verified Student
ravi-gaikwad.webp

Ravi Gaikwad

Network Security Engineer · Infosys

“Enrolling in CCT at WebAsha is one of the best career decisions I have made. The cloud labs were available round the clock, so I could practise assignments whenever I had time. The certification preparation and mock tests made the actual exam feel straightforward. The syllabus covered routing, switching, subnetting, VLANs, and enterprise network troubleshooting in real depth rather than skimming the surface. The learning experience was structured, practical and paced just right for working professionals. This training accelerated my career growth, and I would gladly recommend it to anyone.”
Google Review
karan-mathew.webp

Karan Mathew

Network Administrator · Sopra Steria

“WebAsha's CCT training turned a tough certification into an enjoyable learning experience. Flexible batch timings let me attend alongside my job without any stress. What impressed me was how the trainers connected routing, switching, subnetting, VLANs, and enterprise network troubleshooting to actual production use. The placement assistance team actively shared openings and guided me until I was placed. Every topic was reinforced with practical lab assignments instead of just slides. A big thank you to the trainers and team for such a rewarding learning experience.”
Verified Student
akshay-bansal.webp

Akshay Bansal

Network Security Engineer

“Completing the CCT training at WebAsha was a turning point for me. The placement assistance team actively shared openings and guided me until I was placed. The certification preparation and mock tests made the actual exam feel straightforward. The syllabus covered routing, switching, subnetting, VLANs, and enterprise network troubleshooting in real depth rather than skimming the surface. Doubt-clearing sessions ran even after class hours, which I really appreciated. The batch was slightly large at times, yet the hands-on focus and support made it well worth it.”
Google Review
chetan-reddy.webp

Chetan Reddy

Network Security Engineer · Atos

“I joined WebAsha for CCT to level up my skills, and the experience exceeded my expectations. The learning experience was structured, practical and paced just right for working professionals. We worked hands-on with routing, switching, subnetting, VLANs, and enterprise network troubleshooting, which made every concept stick. The certification preparation and mock tests made the actual exam feel straightforward. The real-world implementation examples helped me understand how things work on the job. The knowledge and confidence I gained here continue to help me every day at work.”
LinkedIn Review
aditya-shaikh.webp

Aditya Shaikh

Network Administrator · Tech Mahindra

“After comparing a few institutes, I chose WebAsha for CCT, and I am glad I did. The learning experience was structured, practical and paced just right for working professionals. What impressed me was how the trainers connected routing, switching, subnetting, VLANs, and enterprise network troubleshooting to actual production use. The knowledge and confidence I gained here continue to help me every day at work.”
Google Review
amol-sayyad.webp

Amol Sayyad

Network Engineer · NTT Data

“WebAsha's CCT training turned a tough certification into an enjoyable learning experience. The course focused on routing, switching, subnetting, VLANs, and enterprise network troubleshooting through practical, real-world scenarios. I could choose between online and classroom training, and both were equally well organised. A big thank you to the trainers and team for such a rewarding learning experience.”
Google Review
ishita-naidu.webp

Ishita Naidu

Network Security Engineer

“WebAsha's CCT training turned a tough certification into an enjoyable learning experience. Hands-on practice on real lab systems built genuine confidence, not just theory. Doubt-clearing sessions ran even after class hours, which I really appreciated. The course focused on routing, switching, subnetting, VLANs, and enterprise network troubleshooting through practical, real-world scenarios. A big thank you to the trainers and team for such a rewarding learning experience.”
Verified Student
Career Roadmap

From your first class to placement

A step-by-step path from your first lesson to certification and a job offer.

Step 1 of 8

Learn

  • Live instructor-led training
  • Concept-first curriculum
  • Recorded sessions
Foundations & Core Concepts
Learn preview
Training Key Features

CCT 100-490 (RSTECH) | Cisco Certified Technician - Routing and Switching training key features

What you get from our CCT 100-490 (RSTECH) | Cisco Certified Technician - Routing and Switching course: a solid foundation in the basics and real-world, skills you can use at work.

  • Post Training Support

  • Real Time Projects : 2

  • Certification & Job Assistance

  • Course Duration : 2 Months

  • Hands-on Training

  • Full Day Lab Access

Our cloud lab

CCT 100-490 (RSTECH) | Cisco Certified Technician - Routing and Switching cloud lab environment

Our Pune classroom practical lab

Program highlights

What learners get at WebAsha Technologies: practical IT training and the skills employers hire for.

Learning Experience

  • In-Depth Practical Training with Real-World Scenarios
  • Choose Between In-Person or Virtual Classes (Flexible Schedules)
  • Guidance from Seasoned IT Professionals
  • Complimentary Intro to Emerging Tech Topics
  • One-on-One Support for Clarifying Concepts
  • Regular Hands-On Exercises and Live Projects
  • Access to a Library of 150+ Training Videos for a Year

Career Development

  • Tailored Job Placement Support with Multiple Interviews
  • Custom Resume Crafting and Interview Coaching
  • Workshops on Professional Skills and Teamwork
  • Affordable Payment Plans with No Extra Fees
  • Help Preparing for International Certifications
  • Personal Career Guidance from Experts
  • Practice Interviews with Industry Leaders
Enroll Now

Why choose WebAsha Technologies

Career-focused IT training with expert mentors, practical labs and vendor certifications, so you stand out when you apply for jobs.

Features Recommended
WebAsha Technologies
Other Institutes
Expert Trainers
10+ Years Experienced Industry Professionals
Freshers or Part-time Instructors
Course Curriculum
Updated for Current Tools (Cybersecurity, Cloud, DevOps, Linux, AI/ML)
Basic or Outdated Content
Hands-on Learning
Real Projects, Labs & Case Studies
Theory-Focused, Limited Practical
Certifications
Vendor-Issued (EC-Council, OffSec, Red Hat, AWS, Microsoft, etc.)
Generic or Unrecognized Certificates
Placement Support
100% Assistance + Resume & Interview Coaching
Limited or No Job Support
Flexible Learning
Classroom & Online Training Options
Rigid Timings, Mostly Classroom-Only
Learning Resources
Lifetime LMS Access, Study Materials, Recorded Sessions
Minimal or No Additional Resources
Batch Size
Small Groups with 1:1 Mentorship
Large, Crowded Batches
Enroll Now

Upcoming batches & schedule

Saturday, November 14, 2026

Online / Classroom
Weekend
6:30 PMIST
Enrollment Closed
Enrollment Closed

Sunday, November 15, 2026

Online / Classroom
Weekend
10:00 AMIST
Enrollment OpenMax intake limit is 10

Saturday, November 21, 2026

Online / Classroom
Weekend
6:30 PMIST
Enrollment OpenMax intake limit is 10

Monday, November 30, 2026

Online / Classroom
Weekday
8:00 AMIST
Enrollment OpenMax intake limit is 10
Flexible Scheduling

Can't find a schedule that works?

Our counsellors can help you arrange a batch that fits your timing.

WhatsApp Contact Us
Course insight 1Course insight 2

CCT 100-490 (RSTECH) | Cisco Certified Technician, Routing and Switching: course training overview

Prepare for Cisco Certified Technician, Routing and Switching with our classroom and online CCT 100-490 (RSTECH) training at WebAsha Technologies. The course teaches the knowledge and skills tested in Cisco's current CCT exam.

Training overview:

CCT is Cisco's entry-level technician certification for onsite support of Cisco devices. The 100-490 RSTECH exam was retired on 9 February 2025, and the certification is now CCT Field Technician, earned through the 800-150 FLDTEC (v1.0) exam. It tests hardware identification, cabling, configuration backup and restoration, and software upgrades and downgrades across routing, switching, data centre, UCS and collaboration platforms. It is a good first step into networking and toward CCNA.

Intended audience:

This course suits aspiring field and network support technicians, IT support staff, freshers and career switchers who want a practical, entry-level Cisco certification and a path toward CCNA.

Topics covered:

  • Networking foundations: OSI and TCP/IP, addressing, cabling.
  • Cisco hardware: Routers, switches, firewalls and their roles.
  • Cisco IOS: Console access and common commands.
  • Cisco software: IOS images, licensing and configuration files.
  • Device replacement: Safety, ESD and the replacement process.
  • Service tasks: Boot-up process, password recovery, serial numbers.
  • Collaboration: Endpoints, call control and Webex services.
  • Data centre and UCS: Nexus, MDS, UCS servers and NX-OS.

Requirements:

Online participants need a stable internet connection and a laptop or desktop. The program includes trainer-led sessions and practice tests.

Prerequisites:

There are no formal prerequisites. Basic computer familiarity helps, and the course teaches networking and Cisco hardware skills from the beginning.

Career benefits:

CCT is a practical way to start a career. In India, CCT-certified technicians typically earn ₹2.5 LPA to ₹12+ LPA as they progress toward CCNA-level engineering roles.

Certification path

CategoryTools & components covered
DevicesCisco routers & switches
OSCisco IOS
AccessConsole, Telnet, SSH
CablingConsole, copper, fibre
ResourcesCisco.com, CCO
SupportCisco TAC, RMA
SimulationPacket Tracer
HardwareModules and interfaces

Curriculum CCT 100-490 (RSTECH) | Cisco Certified Technician - Routing and Switching

CCT Field Technician (800-150 FLDTEC v1.0), the exam that replaced CCT Routing and Switching 100-490 RSTECH: 6 exam domains

1. Networking Foundations (20%)

This domain covers the networking basics a field technician relies on: the communication models, cabling, switching, addressing and routing. It also asks you to identify Cisco device families and what each one does.

  • Common network devices, components and functions, including local area networks and wireless topology
  • The OSI model, the TCP/IP stack, and data encapsulation and de-encapsulation
  • Layer 1 cabling: Ethernet media standards, UTP and fibre optic cabling and connectors
  • Layer 2 switching, IP addressing and subnetting, and Layer 3 routing
  • Roles and functions of Cisco infrastructure, data centre, UCS and collaboration devices
2. Common Service Tasks and Tools (15%)

Here you learn the routine tasks carried out on a service visit and the tools used for them, from connecting to a device to recording its status.

  • The Cisco device boot-up process and common Cisco IOS commands
  • Tools for device file management and for confirming physical layer connectivity
  • Connecting to the console port and accessing devices remotely with common Windows tools
  • Capturing device status and techniques for password recovery
  • Common tools for device replacement and locating serial numbers on Cisco devices
3. Cisco Software (10%)

This domain is about the software that runs on Cisco devices: how it is installed, licensed, backed up and restored.

  • IOS bundle mode compared with install mode
  • Cisco software licensing models
  • Software images: file backup and transfer over FTP, TFTP and USB, and installing Cisco IOS
  • Managing device configuration files
4. Cisco Infrastructure and Collaboration Architecture (10%)

You identify where infrastructure, endpoint and collaboration devices sit in a deployment, and how on-premises and cloud collaboration services fit together.

  • Infrastructure devices, network endpoints and collaboration endpoints
  • On-premises collaboration: endpoints, call controllers, call signalling and media flow, and Cisco Unified Communications Manager
  • Collaboration infrastructure for video endpoints: Telepresence Management Suite, Cisco meeting server and meeting management
  • Cisco cloud services: Webex meetings, Calling and Control Hub, and Cisco hosted collaboration solutions
5. Cisco Hardware Replacement (35%)

The largest domain covers the replacement work itself: working safely, swapping each family of Cisco device, and the NX-OS knowledge needed for data centre switches.

  • Safety and environmental protocols: a safe work zone and ESD discharge
  • The replacement process for Catalyst switches and edge platforms, Meraki switches, ISR and ASR routers, the 8000 Series, the NCS Series and Cisco Secure Firewall
  • The replacement process for Nexus and MDS switches, UCS infrastructure components, UCS B-Series, C-Series, X-Series and E-Series, and collaboration devices
  • Cisco NX-OS: supported platforms, operating modes, CLI commands, ACI and NX-OS boot modes, and password recovery
  • Collaboration endpoint solutions: IP phones and video endpoints
6. Cisco UCS and Data Center Architecture (10%)

The last domain looks at the data centre: which devices are found there, how virtualisation and cloud models are described, and where UCS devices are placed.

  • Devices in a data centre network: LAN/SAN and Unified Fabric, Nexus switches, UCS servers and MDS directors
  • Server deployment models: ToR, EoR and FEX
  • Virtualised data centre components: virtual machines, hypervisors, cloud deployment models and cloud delivery models
  • Cisco UCS components, connectivity and placement in campus networks, edge locations and data centres

Download the complete course syllabus

Get the full curriculum, modules & exam details delivered to you instantly.

Meet our expert trainers

Learn from certified CCT 100-490 (RSTECH) | Cisco Certified Technician - Routing and Switching experts who work in the industry and teach with practical, real-world examples.

  • Simplified Guidance: Break down Linux concepts for beginners.
  • Hands-On Practice: Engage in labs for command-line and admin tasks.
  • Customized Support: Offer one-on-one help for your goals.
  • Career & Lab Aid: Assist with projects and exam prep.
  • Industry Knowledge: Draw from extensive Red Hat experience.
  • Certified Professionals: Hold RHCSA, RHCE credentials.
  • Real-World Application: Insights from enterprise Linux deployments.
  • Training Success: Over 1,000 students guided annually.
  • Corporate Links: Partnerships with IBM, Accenture, Wipro.
Free Skill Assessment

Self assessment

Test your skills with an online assessment exam and find out how ready you are for your certification.

  • Free mock test
  • Instant score report
  • Mapped to the certification
Learner taking an online skills assessment

CCT 100-490 (RSTECH) | Cisco Certified Technician, Routing and Switching: certification bootcamp

Cisco Certified Technician, Routing and Switching is a Cisco certification recognised worldwide. Cisco retired its 100-490 RSTECH exam on 9 February 2025, so this bootcamp prepares you for the replacement, 800-150 FLDTEC, a 120-minute entry-level exam. Passing it earns the CCT Field Technician certification, and it is a good step toward CCNA.

  • Expert Trainers: Your trainers are engineers with field experience.
  • Hands-On Hardware: Work with real Cisco devices.
  • IOS CLI Practice: Practise the commands until you are comfortable with them.
  • Entry-Level Friendly: No prerequisites. The course starts from the basics.
  • Stepping Stone to CCNA: The networking foundations carry over to CCNA.
  • Flexible Batches: Weekday/weekend and online/classroom options.
  • Placement Support: Help with your resume and interviews.
  • Exam-Focused: Practice tests and mock exams.

CCT 100-490 (RSTECH) exam details and format

AttributeDetails
Exam Code100-490 RSTECH was retired on 9 February 2025. Current exam: 800-150 FLDTEC (v1.0)
CertificationCisco Certified Technician (CCT) Field Technician, which replaced CCT Routing and Switching
LevelEntry / Technician
Duration120 minutes
Question CountNot published by Cisco
Question TypesNot listed by Cisco. The exam is proctored, online or at a test centre
Passing ScoreNot published by Cisco (graded pass or fail)
Validity3 years
RecertificationPass the current CCT exam (800-150 FLDTEC) or a higher-level Cisco exam
PrerequisiteNone required

CCT 100-490 (RSTECH) exam passing criteria

Cisco retired the CCT Routing and Switching exam (100-490 RSTECH) on 9 February 2025. Its replacement, 800-150 FLDTEC v1.0, is a 120-minute exam with six domains: Networking Foundations (20%), Common Service Tasks and Tools (15%), Cisco Software (10%), Cisco Infrastructure and Collaboration Architecture (10%), Cisco Hardware Replacement (35%) and Cisco UCS and Data Center Architecture (10%). Cisco does not publish the passing score or the number of questions, and the result is reported as pass or fail. Most Cisco certifications are active for three years. CCT is renewed by passing the current CCT exam or a higher-level Cisco exam. WebAsha's hardware and IOS labs match the practical, onsite focus of this exam and give you a base for CCNA.

WhatsApp

Job roles and salary outlook after CCT 100-490 (RSTECH)

CCT is a practical way into networking. These are the onsite support and field-engineering roles CCT-certified technicians usually apply for across India.

Job Title Primary Responsibilities Average Salary (INR)
Field Network Technician Support Cisco hardware onsite. Fresher: ₹2.5-4.5 LPA
Experienced: ₹5-10 LPA
Network Support Technician Diagnose and replace devices. Fresher: ₹2.5-4.5 LPA
Experienced: ₹5-10 LPA
Desktop & Network Support Support IT and networks. Fresher: ₹2.5-4 LPA
Experienced: ₹5-9 LPA
Data Centre Technician Rack, cable and support devices. Fresher: ₹3-5 LPA
Experienced: ₹6-12 LPA
NOC Technician Monitor and escalate incidents. Fresher: ₹3-5 LPA
Experienced: ₹6-11 LPA
Junior Network Engineer Grow toward CCNA-level roles. Fresher: ₹3-5 LPA
Experienced: ₹6-12 LPA

Salaries after CCT 100-490 (RSTECH) training vary with experience and role.


Career benefits of CCT 100-490 (RSTECH)

CCT is a practical first certification. It shows you can support Cisco hardware onsite, and it leads toward CCNA.

  • Recognition: Cisco runs the same CCT exam worldwide.
  • Strong Demand: Onsite support and field roles need people who can replace devices.
  • Salaries: See the salary table below for typical ranges in India.
  • Career Growth: CCT leads on to CCNA-level engineering roles.
  • Industry Standard: Employers know what a CCT holder has been tested on.
  • Outlook: The current exam also covers data centre, UCS and collaboration devices.

Why choose CCT 100-490 (RSTECH) training at WebAsha Technologies in Pune

Prepare for CCT 100-490 (RSTECH) with WebAsha Technologies. The program follows Cisco's current CCT exam topics and includes trainer-led sessions and practice tests.

  • Expert Trainers: Your trainers are engineers with field experience.
  • Hands-On Hardware: Work with real Cisco devices.
  • IOS CLI Practice: Practise the commands until you are comfortable with them.
  • Entry-Level Friendly: No prerequisites. The course starts from the basics.
  • Stepping Stone to CCNA: The networking foundations carry over to CCNA.
  • Flexible Batches: Weekday/weekend and online/classroom options.
  • Placement Support: Help with your resume and interviews.
  • Exam-Focused: Practice tests and mock exams.

Program Highlights

What the program includes

Learning, career, certification and placement support in one program.

Learning benefits

  • Structured Curriculum
    Concept-first, job-ready syllabus
  • Hands-On Labs
    Practice every concept live
  • Expert-Led Sessions
    Learn from working professionals

Career benefits

  • Resume Building
    ATS-friendly, recruiter-ready
  • Mock Interviews
    Real interview simulations
  • Job Referrals
    Access to hiring partner network

Certification benefits

  • Globally Recognized
    Industry-standard certifications
  • Exam Preparation
    Targeted, exam-focused coaching
  • Practice Tests
    Unlimited mock assessments

Placement benefits

  • 500+ Hiring Partners
    Active recruiter network
  • Placement Drives
    Regular hiring opportunities
  • Salary Negotiation
    Guidance to maximize offers
Success Stories

Placement success stories

Starting your first IT job or changing direction? Explore the career paths below and think about what you want from your next role. Our team can help you plan the training and preparation to work towards it.

rohan-pillai.webp

Rohan Pillai

Network Engineer · Wipro

“WebAsha's CCT training turned a tough certification into an enjoyable learning experience. The course focused on routing, switching, subnetting, VLANs, and enterprise network troubleshooting through practical, real-world scenarios. Flexible batch timings let me attend alongside my job without any stress. Easily a five-star experience that prepared me for both the exam and real work.”
Cisco Certified
YV

Yogesh Verma

Network Engineer · Mphasis

System AdministratorNetwork Engineer
“As a System Administrator, I felt stuck in my growth, so I took the leap and signed up for CCT at WebAsha. Certification preparation, mock tests and repeated mock interviews prepared me for real technical rounds. The trainers were patient and genuinely industry-experienced, and the practical focus on routing, switching, subnetting, VLANs, and enterprise network troubleshooting made everything click. I landed a Network Engineer position at Mphasis with a strong hike from 3.5 LPA to 6.5 LPA, and I owe it to WebAsha.”
My journey: System Administrator to Network Engineer
pooja-deshmukh.webp

Pooja Deshmukh

Network Engineer · Zensar

Sales ExecutiveNetwork Engineer
“After a few years as a Sales Executive, I decided it was time for a real change and joined WebAsha's CCT training. Certification preparation, mock tests and repeated mock interviews prepared me for real technical rounds. Working on real-world implementations helped me understand exactly how things run on the job. Today I proudly work as a Network Engineer at Zensar, and the jump from 6 LPA to 13.5 LPA still feels surreal.”
From Sales Executive to Network Engineer
anjali-gupta.webp

Anjali Gupta

Network Administrator · Accenture

Technical Support AssociateNetwork Administrator
“After a few years as a Technical Support Associate, I decided it was time for a real change and joined WebAsha's CCT training. Certification preparation, mock tests and repeated mock interviews prepared me for real technical rounds. Today I proudly work as a Network Administrator at Accenture, and the jump from 4 LPA to 7 LPA still feels surreal.”
From Technical Support Associate to Network Administrator
MA

Meera Ansari

Network Engineer · HCLTech

B.Sc. GraduateNetwork Engineer
“As a B.Sc. Graduate, I felt stuck in my growth, so I took the leap and signed up for CCT at WebAsha. Working on real-world implementations helped me understand exactly how things run on the job. Within a few months I moved from B.Sc. Graduate to Network Engineer at HCLTech, and my package grew from 6 LPA to 11.5 LPA.”
How I became a Network Engineer with WebAsha
sourabh-fernandes.webp

Sourabh Fernandes

Network Administrator · Cognizant

“The CCT program at WebAsha genuinely lived up to its reputation. Every topic was reinforced with practical lab assignments instead of just slides. The course focused on routing, switching, subnetting, VLANs, and enterprise network troubleshooting through practical, real-world scenarios. The mock interviews and interview preparation sharpened me for real technical rounds. The batch was slightly large at times, yet the hands-on focus and support made it well worth it.”
Cisco Certified
amol-sayyad.webp

Amol Sayyad

Network Engineer · NTT Data

“WebAsha's CCT training turned a tough certification into an enjoyable learning experience. The course focused on routing, switching, subnetting, VLANs, and enterprise network troubleshooting through practical, real-world scenarios. I could choose between online and classroom training, and both were equally well organised. A big thank you to the trainers and team for such a rewarding learning experience.”
Cisco Certified
yogesh-gaikwad.webp

Yogesh Gaikwad

Network Security Engineer · Infosys

Sales ExecutiveNetwork Security Engineer
“After a few years as a Sales Executive, I decided it was time for a real change and joined WebAsha's CCT training. The hands-on labs and live projects around routing, switching, subnetting, VLANs, and enterprise network troubleshooting rebuilt my confidence from the ground up. Within a few months I moved from Sales Executive to Network Security Engineer at Infosys, and my package grew from 6 LPA to 14 LPA.”
From Sales Executive to Network Security Engineer
divya-rao.webp

Divya Rao

Network Security Engineer · Sopra Steria

B.Sc. GraduateNetwork Security Engineer
“I started out as a B.Sc. Graduate and always wanted a stronger technical career, so I enrolled in the CCT program at WebAsha. The placement team actively shared openings and coached me through resume building and every interview. Today I proudly work as a Network Security Engineer at Sopra Steria, and the jump from 3.5 LPA to 8 LPA still feels surreal.”
How I became a Network Security Engineer with WebAsha
View all stories →
Quick Summary

CCT 100-490 (RSTECH) | Cisco Certified Technician - Routing and Switching is a hands-on Cisco networking training course by WebAsha Technologies, available online and in classroom with live projects, certification prep and placement support. It suits beginners and professionals, runs about 6 to 12 weeks, and leads to roles such as Network Engineer, Network Administrator, Network Security Engineer paying roughly 3.0 to 22.0 LPA.

Key takeaways

  • Master networking through hands-on, practical training.
  • Learn network fundamentals & the osi model and ip addressing & subnetting.
  • Work on real-world projects and lab exercises.
  • Earn an industry-recognised certificate.
  • Get placement support for roles paying up to 22.0 LPA.

CCT 100-490 (RSTECH) | Cisco Certified Technician - Routing and Switching: WebAsha vs other options

FeatureWebAsha networkingSelf-studyGeneric online course
Live instructor-led trainingYesNoSometimes
Hands-on labs & real projectsYesLimitedLimited
Certification exam preparationYesSelf-managedVaries
Doubt-solving & mentorshipYesNoLimited
Placement assistanceYesNoRare
Industry-recognised certificateYesNoVaries

Related certification exams

Related categories

Last updated: 23 June 2026

CCT 100-490 (RSTECH) | Cisco Certified Technician - Routing and Switching FAQs

CCT 100-490 (RSTECH) | Cisco Certified Technician - Routing and Switching is a hands-on training program in Cisco networking. It takes you from fundamentals to working skills through live sessions, lab practice and real projects, with an industry-recognised certificate and placement support.

Freshers starting a networking career IT support staff moving to networks Aspiring network/security engineers Professionals preparing for Cisco certification

Basic computer and IT familiarity Interest in networks and infrastructure No prior networking experience required

You will build practical skills including network fundamentals & the osi model, ip addressing & subnetting, routing (ospf, eigrp), switching & vlans, network security basics and more, applied through hands-on labs and real projects.

The CCT 100-490 (RSTECH) | Cisco Certified Technician - Routing and Switching syllabus spans Cisco networking, from core concepts to advanced modules, each reinforced with lab exercises and a capstone-style project.

CCT 100-490 (RSTECH) | Cisco Certified Technician - Routing and Switching typically runs about 6 to 12 weeks depending on the track (weekday or weekend), plus lab and project time. Fast-track and extended options are available. Ask for the current batch schedule.

CCT 100-490 (RSTECH) | Cisco Certified Technician - Routing and Switching fees depend on the mode (classroom or live-online) and track, and WebAsha Technologies offers flexible / no-cost EMI options. Request the latest fee details and any running offers from the enquiry form.

Both. You can take CCT 100-490 (RSTECH) | Cisco Certified Technician - Routing and Switching as a live-online program or attend classroom sessions, with the same syllabus, hands-on labs and trainers in either mode.

Yes. CCT 100-490 (RSTECH) | Cisco Certified Technician - Routing and Switching runs in weekday, weekend and evening batches so students and working professionals can train without disturbing their schedule.

Yes. CCT 100-490 (RSTECH) | Cisco Certified Technician - Routing and Switching starts from fundamentals so beginners can follow along, while the advanced modules add depth for experienced learners.

Absolutely. Many learners are working professionals. Flexible weekend, evening and live-online CCT 100-490 (RSTECH) | Cisco Certified Technician - Routing and Switching batches let you upskill without a career break.

Yes. CCT 100-490 (RSTECH) | Cisco Certified Technician - Routing and Switching is project-driven. You practise in real labs and build live projects in Cisco networking alongside the theory, so you finish interview-ready.

After completing CCT 100-490 (RSTECH) | Cisco Certified Technician - Routing and Switching you can target roles such as Network Engineer, Network Administrator, Network Security Engineer, Systems Engineer, with senior packages reaching around 22.0 LPA depending on experience and location.

Cisco networking roles typically start around 3.0 LPA for freshers and rise to about 22.0 LPA for experienced professionals. Actual packages depend on your skills, role and employer.

Yes. Cisco networking skills are in strong, growing demand across IT services, product companies and startups, offering clear career progression and rising salaries for certified professionals.

Trained networking professionals are hired by IT-services majors, global capability centres, product companies and startups. Organisations across the industry actively recruit for Cisco networking.

Yes. WebAsha Technologies provides resume building, mock interviews and referrals to hiring partners as part of dedicated placement support. Outcomes depend on your skills and effort.

CCT 100-490 (RSTECH) | Cisco Certified Technician - Routing and Switching is taught by experienced, industry-certified trainers who bring real project experience into the classroom, so you learn current, job-relevant practices.

Yes. You receive an industry-recognised WebAsha training certificate, and the course also prepares you for the relevant official certification exam.

Yes. Alongside job skills, CCT 100-490 (RSTECH) | Cisco Certified Technician - Routing and Switching includes structured exam preparation, with practice tests and guidance for the recognised networking certification employers look for.

Yes. You can book a free demo session for CCT 100-490 (RSTECH) | Cisco Certified Technician - Routing and Switching to meet the trainer and experience the teaching style before you enroll.

WebAsha combines hands-on labs, certified trainers, live projects, certification prep and dedicated placement support. It is a practical, job-focused route into Cisco networking.

Click Enroll Now, request a callback, or message our team on WhatsApp to get the latest batch schedule, fees and available offers.

Keep Exploring

Related courses

CCNP SCOR 350-701 | Implementing and Operating Cisco Security Core Technologies

CCNP SCOR 350-701 | Implementing and Operating Cisco Security Core Technologies

CCNP SCOR 350-701 (Implementing and Operating Cisco Security Core Technologies) is the core exam of the CCNP Security track and the qualifying exam for CCIE Security. The current SCOR 350-701 (v2.0) exam tests enterprise security skills in six areas: security concepts, network security, cloud security, secure service edge (SSE/SASE), endpoint protection and detection, and network access, visibility and enforcement. It uses current Cisco Secure product names and includes zero trust and AI/LLM risks. Passing it also earns the Cisco Certified Specialist (Security Core) certification. Prepare for the CCNP SCOR 350-701 certification exam at WebAsha with expert trainers, practice tests and placement assistance, online or in the classroom.

★ 5.00View course →
DevNet DEVCOR 350-901 | Developing Applications using Cisco Core Platforms and APIs

DevNet DEVCOR 350-901 | Developing Applications using Cisco Core Platforms and APIs

DevNet DEVCOR 350-901 (Developing Applications using Cisco Core Platforms and APIs) was the core exam of the Cisco Certified DevNet Professional track. On 3 February 2026 Cisco renamed its DevNet certifications to an Automation track, and exam 350-901 is now AUTOCOR v2.0 (Designing, Deploying and Managing Network Automation Systems), the core exam for CCNP Automation. It replaced DEVCOR v1.1 and covers network automation, infrastructure as code, operations and AI in automation, with Python used throughout. Pass it along with one concentration exam and you earn CCNP Automation. WebAsha Technologies prepares you for the 350-901 certification exam with expert trainers, practice tests and placement assistance, in online and classroom batches.

★ 5.00View course →
CCNP ENSDWI 300-415 | Implementing Cisco Catalyst SD-WAN Solutions

CCNP ENSDWI 300-415 | Implementing Cisco Catalyst SD-WAN Solutions

CCNP ENSDWI 300-415 (Implementing Cisco Catalyst SD-WAN Solutions) is a concentration exam in the CCNP Enterprise track that tests Cisco Catalyst SD-WAN. The current version, ENSDWI 300-415 v1.2, covers SD-WAN architecture, controller deployment, WAN Edge router deployment, policies, security and quality of service, and management and operations. It uses the current Catalyst SD-WAN product names. Pass it along with the ENCOR 350-401 core exam and you earn CCNP Enterprise. WebAsha Technologies prepares you for the CCNP ENSDWI 300-415 certification exam with expert trainers, practice tests and placement assistance, in online and classroom batches.

★ 5.00View course →
CCNP ENARSI 300-410 | Implementing Cisco Enterprise Advanced Routing and Services

CCNP ENARSI 300-410 | Implementing Cisco Enterprise Advanced Routing and Services

CCNP ENARSI 300-410 (Implementing Cisco Enterprise Advanced Routing and Services) is a concentration exam in the CCNP Enterprise track that tests advanced enterprise routing. The current version, ENARSI 300-410 v1.1, covers Layer 3 technologies (EIGRP, OSPF, BGP, redistribution and policy-based routing), VPN technologies (MPLS and DMVPN), infrastructure security and infrastructure services such as SNMP, logging, DHCP, IP SLA and NetFlow. Most of the topics ask you to troubleshoot. Pass it along with the ENCOR 350-401 core exam and you earn CCNP Enterprise. WebAsha Technologies prepares you for the CCNP ENARSI 300-410 certification exam with expert trainers, practice tests and placement assistance, in online and classroom batches.

★ 5.00View course →
CCNP ENCOR 350-401 | Implementing Cisco Enterprise Network Core Technologies

CCNP ENCOR 350-401 | Implementing Cisco Enterprise Network Core Technologies

CCNP ENCOR 350-401 (Implementing Cisco Enterprise Network Core Technologies) is the core exam of the CCNP Enterprise track and the qualifying exam for CCIE Enterprise Infrastructure. The ENCOR 350-401 (v1.2) exam tests enterprise networking skills across architecture, virtualization, infrastructure (Layer 2, Layer 3 routing and IP services), network assurance, security, and automation and artificial intelligence. Passing it also earns the Cisco Certified Specialist (Enterprise Core) certification. Prepare for the CCNP ENCOR 350-401 certification exam with expert trainers, practice tests and placement assistance. CCNP ENCOR 350-401 online & classroom course.

★ 5.00View course →
CCNA 200-301 | Cisco Certified Network Associate

CCNA 200-301 | Cisco Certified Network Associate

CCNA 200-301 (Cisco Certified Network Associate) is Cisco's associate-level networking certification. The current CCNA 200-301 (v1.1) exam tests whether you can install, configure and operate a network across six areas: network fundamentals, network access (switching, VLANs, wireless), IP connectivity (routing, OSPF), IP services, security fundamentals, and automation and programmability, which includes AI and machine learning in network operations. Cisco has announced CCNA v2.0 for 3 February 2027, and v1.1 can be taken until 2 February 2027. Prepare for the CCNA 200-301 certification exam with expert trainers, practice tests and placement assistance. CCNA 200-301 online & classroom course.

★ 5.00View course →
Computer Networking Fundamentals

Computer Networking Fundamentals

Computer Networking Fundamentals is a hands-on, job-oriented programme that teaches the basics of computer networking. It covers the OSI and TCP/IP models, IPv4 and IPv6 addressing and subnetting, switching and VLANs, routing, common protocols and services (DNS, DHCP, HTTP), network devices and cabling, wireless, and network security basics. This is the grounding you need for IT and networking jobs, and a good base before Cisco CCNA and CompTIA Network+. You learn from expert trainers in real labs, with placement assistance. Computer Networking Fundamentals is available as an online and classroom course.

★ 5.00View course →
Computer Hardware & Maintenance

Computer Hardware & Maintenance

Computer Hardware & Maintenance is a hands-on, job-oriented programme that trains you to work as a computer hardware and maintenance technician. It covers PC components and assembly, BIOS/UEFI, storage, operating-system installation, peripherals and printers, troubleshooting and repair, and the basics of networking. These are the practical skills needed for IT support and field-technician jobs, and they give you a good base for CompTIA A+ and Cisco CCT. You learn from expert trainers in real labs, with placement assistance. Computer Hardware & Maintenance is available as an online and classroom course.

★ 5.00View course →

Take the next step in your IT career

Join thousands of learners who upskilled and got placed with WebAsha Technologies.

Book Free Demo Download Brochure Talk To Expert